|
|
 SIGN
UP FOR FREE |
|
|
|
Sign Up for a free account or
learn more. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Most Recent Articles
|
- Cisco Certification: Becoming A Truly Valuable Ccna
I've been active in the Cisco Certification track for four years, working my way from the CCNA to the coveted Cisco Certified Internetwork Expert title, and during that time I've conducted job interviews and casual conversations with hundreds of CCNAs and CCNA candidates.
The CCNA is an exciting beginning to your Cisco career, but just having the certification simply isn't enough. A recruiter or interviewer isn't going to be impressed just with the cert you've got to have some real-world knowledge to back it up. - Cisco Certification: Making A Good Impression In Your Job Interview
Okay, you did it! You earned your Cisco Certified Network Associate certification.
Now what? - Cisco Certification: Introduction To Isdn
From the CCNA to the CCIE, ISDN is one of the most important technolgies you'll work with. It's also very common in the field ISDN is frequently used as a backup connection in case an organization's Frame Relay connections go down. Therefore, it's important to know ISDN basics not only for your particular exam, but for job success.
ISDN is used between two Cisco routers that have BRI or PRI interfaces. Basically, with ISDN one of the routers places a phone call to the other router. It is vital to understand not only what causes one router to dial another, but what makes the link go down. - Computer Certification: Four Tips For Maximum Performance During The Exam
There are plenty of articles out there about how to prepare for a computer certification exam. However, there are also things you can do to increase your chances of success on exam day during the most important part of the entire process -- the time that you're actually taking the test.
I've taken many a certification exam over the years, and helped many others prep for theirs. Here are the five things you must do on exam day to maximize your efforts. - Cisco Certification: Learning To Navigate Cisco's Online Documentation
When studying for your Cisco CCNA, CCNP, or CCIE exam, you’ve got a powerful online weapon at your disposal. It’s Cisco Connection Documentation, found at www.cisco.com/univercd. This site contains product, code, and protocol documentation for all Cisco products.
Many exam candidates really don’t start using this powerful tool until they’re studying for their more advanced exams. However, it’s important for CCNAs, CCNPs, and candidates for these certifications to learn their way around this site. It comes in handy for finding default values that Cisco really enjoys asking about on exams, and the protocol documentation found there can help you study as well. - Cisco Certification: The Importance Of Building Your Own Home Lab
CCNAs and CCNA candidates hear it all the time: “Get some hands-on experience”. From my personal experience climbing the Cisco certification ladder, I can tell you firsthand that there is no learning like hands-on learning. No simulator in the world is going to give you the experience you will get cabling and configuring your own routers.
Whenever I mention this to one of my students, they always say it costs too much. The truth is, it is cheaper now to build your own CCNA and CCNP lab than it has ever been. The secret? Used routers. - Cisco Certification: Don't Depend On Practice Exams
Ask a CCNA candidate how they’re preparing for exam day, and you’ll get different answers. Different books, different websites, different practice exams.
One trend I’ve noticed is that some candidates answer the question by reeling off the number and names of the practice exams they’ve purchased. Basically, the candidate is studying by taking a lot of practice exams. And in some cases, I mean a lot of them. - Configuring Basic Cisco Router Security
Network security is a hot topic today, and will only increase in importance in the months and years ahead.
While most of the attention is paid to exterior threats, there are some steps you can take to prevent unwanted Cisco router access from within your organization. - Cisco Certification: Don't Overreact To Exam Version Changes
Whenever a Cisco exam version changes, there's always a lot of chatter about it on the web. The CCNA exams are no exception.
One comment I see often goes like this: " I hear Cisco is going to change Intro / ICND / CCNA exam versions soon, so I'm not going to start studying yet. I'll wait until the new exam comes out." - Cisco Certification: Putting Together Your Own Home Practice Lab
CCNA and CCNP candidates hear it all the time: “Get some hands-on experience”. From my personal experience climbing the Cisco certification ladder, I can tell you firsthand that there is no learning like hands-on learning. No simulator in the world is going to give you the experience you will get cabling and configuring your own routers.
Whenever I mention this to one of my students, they always say it costs too much. The truth is, it is cheaper now to build your own CCNA and CCNP lab than it has ever been. The secret? Used routers. - What To Expect When Taking Your First Cisco Certification Exam
Cisco Certification: Taking Your First Certification Exam
You’ve studied hard you’ve practiced your configurations you’ve used your flash cards over and over again and finally, the big day is here. Your first certification exam! - Cisco Certification: A Survival Guide To The Cisco Cable Jungle
One of the most confusing parts of beginning your Cisco studies is keeping all the cable types separate in your mind, and then remembering what they’re used for. This often occurs when a CCNA or CCNP candidate starts putting together their own home practice lab, and they suddenly realize that they have the equipment to run labs, but not the cables.
With this in mind, here are some common Cisco cable types and their primary use. - Five Questions To Ask Before Attending A Computer Tech School
As with any field, there are good technical training schools, and bad ones. When you sign up with one of these schools, you’ve made a significant investment in time and money. You deserve to know everything about the school and your job prospects after leaving that school before you put down your hard-earned money. The problem is, sometimes it’s hard to know the right questions to ask.
The point of this article is not to bash technical training schools. That’s how I got my start in IT eight years ago, and today I’m a CCIE™ and own my own Cisco training company and my own consulting firm. - Cisco Ccna Certification: The Importance Of Hands-on Practice
CCNA and CCNP candidates hear it all the time: “you have to get some hands-on experience to pass the exams”.
Candidates tend to think that’s just so they can solve the simulator problems, but that’s only the more obvious reason. - Cisco Ccna Certification: The Importance Of The Osi Model
There's nothing I enjoy more than teaching Cisco technologies, especially CCNA candidates. Whether it's in-person or online, everyone's excited to be there. There's a sense of anticipation in the air, and everyone is ready to work hard, get their hands on the racks of Cisco routers and switches I
have available...
... and then I break out the OSI model chart. Chins slump. People sigh, or at least wish they hadn't ordered decaf that morning. - The Hidden Benefit Of Computer Certifications
The web is covered with stories regarding the benefits of professional computer certification, and most of them are backed up with salary surveys and the like. While there’s certainly nothing wrong with making more money and having better job prospects, there’s one benefit of certification that many candidates forget about.
Confidence. - Cisco Certification: Suggested Home Lab Setups
When you make the decision to put your own home lab together for your CCNA and CCNP studies (a very wise decision, if I may say so!), the hardest part is figuring out how to spend your budget. Do you spend it all on the routers and go with a cheaper 1900 switch, knowing that the 640-801 (CCNA), 640-821 (Intro), and 640-811 (ICND) exams now place a premium on knowing the ins and outs of a 2950 switch? Do you buy a frame relay switch? Do you buy an access server?
One factor to keep in mind when you're starting to put your lab together is that you don't have to put it all together at one time. With some careful planning, you've got a lab that you can use for your Intro studies, perhaps add a router or two for ICND study, and then some more devices for your CCNP study. - Cisco Certification: Ccna Certifcation Faq
When you start your CCNA studies, a lot of questions come to mind! Here are the five most common questions CCNA candidates have, answered by Chris Bryant, CCIE #12933.
Q. What exams do I have to take to get my CCNA? - Cisco Certification: The Most Important Study You'll Ever Do Is....
All of us are familiar with the pyramids of Egypt. These magnificent structures have stood for thousands of years, withstanding extreme heat and other factors that would bring down an ordinary structure.
When we look at these pyramids, we instinctively look toward the peak. We tend to do the same with the Cisco Learning Pyramid. If you're not familiar with this, Cisco uses a pyramid to illustrate how the CCIE is at the peak of the Cisco certification structure, with the CCNP in the middle and the CCNA at the bottom. - Mcse? Ccna? Choosing The Right Computer Certification For Your Career
When you’re choosing which computer certification to pursue next, you should also be formulating a plan for your career. Your time is precious, and you should never choose to pursue a certification because it’s “hot”. There are some hard questions you should ask yourself before deciding to pursue the CCNA, CCNP, CCVP, CCSP, CCIE, MSCE, or any of the many other vendor certifications that are out there.
Why do I want this certification? - Cisco Routing: "ip Default-network" Vs. Default Static Routes
One point of confusion for some CCNA and CCNP candidates is the difference between configuring a static default route and using the Cisco routing command ip default-network.
At first glance, they appear to do the same thing. Both configure a destination to which packets should be routed if there is no more specific route in the routing table. - Cisco Home Lab Tutorial: Buying And Building A Frame Relay Switch
One of the major topics on your CCNA and CCNP exams is Frame Relay. Additionally, Frame Relay is one of the most popular WAN technolgies in today's networks. Getting hands-on experience with Frame Relay in Cisco networks isn't just a good idea, it's a necessity. Let's face it, your employer is going to get a little touchy if you start experimenting with your network's Frame Relay setup.
To practice all your important Frame Relay commands for your exams, you need a working Frame Relay cloud in your home lab. A production network's Frame cloud consists of a lot of Frame switches, but if you choose wisely, a single Cisco router can act as your home lab's entire Frame cloud! - Cisco Ccna / Ccnp Home Lab Tutorial: Buying And Configuring An Access Server
A Cisco access server is generally the last item a CCNA or CCNP candidate has on their mind when they're putting together a home lab. The thinking tends to be that since this router isn't really doing anything in the production part of your practice lab, it's not really important.
Once you have more than two devices in your home lab, though, you'll realize that constantly moving the console cable around from one router to another gets very tiresome. That's what an access server does for a home lab - it allows you to connect your PC to a single device when working in your home lab, with no need to constantly disconnect and reconnect the console cable. The console cable will be connected directly to the access server, and the access server is connected to all the other devices in your home lab. Once you start working with one, you'll wonder how you got along without it! - Cisco Routing For The Ccna And Ccnp: Administrative Distance
The textbook definition of "administrative distance" is simple enough: "the measurement of a protocol's believability". It's not enough to know the definition, however you've got to know when AD comes into the picture and when it does not.
When a packet needs to be routed, the router looks in its routing table for the next-hop IP address the packet should take to get to the destination. There may be more than one matching path, in which case the router will look for the "longest match". The route that has the longest match - the route with the most bits in the mask set to "1" - will be the route that is used. - The Future Of Computer Certification Exams
The format and difficulty of computer certification exams is constantly changing. When I took my first certification exam (Novell NetWare 3.1x CNA, January 1997), there was no such thing as a simulator question, and my practical skills really were not tested. The exams then were much heavier on memorization.
One factor that helped make up for that was that the Novell exams were adaptive. If you missed a question on a particular topic, you would continue to be asked questions about that topic until you got it right. You couldn't afford to be weak in any topic, because the exam would most likely find that out and keep hitting you with questions on that topic until you failed. - Keeping Calm On Ccna / Ccnp Exam Day
When you wake up on exam day, one of two things is going to happen. Well, yes, you're going to pass or fail. But what I'm thinking of comes before that, and has a lot to do with how you perform on exam day.
You're either going to have a tremendous feeling of anticipation or the dreaded feeling of being nervous about it. - Cisco Certification: In What Order Should You Take Your Ccnp Exams ?
When you choose to pursue your Cisco Certified Network Professional certification, you've got some decisions to make right at the beginning. Cisco offers a three-exam path and a four-exam path, and you select the order in which you'll take and pass the exams.
While every CCNP candidate has to make their own decision, I'd like to share some thoughts based on my personal experience and the experiences of CCNPs worldwide. - Taking A Look At Cisco's Ccvp Certification
I hardly have to tell you how important voice technologies are in today's networks; what we all need to keep in mind to maximize our career potential is how important knowing voice is going to be tomorrow.
We've always got to look forward in IT, both in our work and out studies. Cisco, always the pioneer in technical certifications, now offers a Cisco Certified Voice Professional certification that is gaining a lot of attention from IT professionals looking to add to their skills and their resume. - Securing Your Network And Your Career With Cisco's Ccsp Certification
You don't need me to tell you that security is the #1 concern in today's networks. With that in mind, your career path must include some security certifications, or you will be left behind.
Cisco's Cisco Certified Security Professional (CCSP) certification demands a candidate be well-rounded and well-versed in Cisco security measures. Besides the difficultly we've all come to expect from a Cisco exam, this five-exam path covers every major aspect of network security (from Cisco's viewpoint, anyway!) - Passing The Ccna And Ccnp: Home Lab Shopping On Ebay
Whether you're just getting ideas for your Cisco home lab or adding to your existing lab, ebay is a great place to get ideas for your lab as well as pick up some great bargains.
Of course, the internet being what it is, there are always going to be a few people looking to take your money while shipping you inferior merchandise, or worse, no merchandise at all. While these "dealers" are in the minority, you still need to be careful when purchasing Cisco equipment on ebay. In this article, I'll give you several tips on browsing ebay ads for home lab ideas, and a few things to look out for when purchasing equipment on ebay.
For those of you just starting your Cisco certification pursuit, the idea of purchasing a home lab kit -- a set of routers, switches, and perhaps some cables and study guides -- seems like a good idea. Instead of putting your lab together one piece at a time, these kits allow you to get a head start on your studies. - Passing The Ccna And Ccnp: Three Myths About Cisco Exams
One of the drawbacks to the Internet is that it allows myths and "friend of a friend" stories to spread quickly, and usually the story becomes more exaggerated as it's passed along. Cisco exams are no exception. Here are three often-repeated myths and exaggerations regarding the CCNA and CCNP exams.
1. The survey you fill out before the exam determines the questions you'll get. Before you actually start your exam, Cisco presents you with a survey asking how you prepared and how comfortable you feel with certain technologies. It's a little awkward to rate yourself on Frame Relay, ISDN, etc., especially since the exam you're about to take covers those subjects. It's human nature to think that these questions impact your exam, but they do not. - How To Earn Cisco’s Firewall Specialist Certification
Security is a hot topic in today's networks, and will continue to be for a long time to come. With that in mind, you must consider adding a Cisco security certification to your resume and firewall skills to your skill set.
It's quite a jump from the CCNA to the CCSP (Cisco Certified Security Professional), and Cisco has made that leap more manageable by adding Specialist certifications. These certifications can give quite a boost to both your resume and your skill set, and act as a great "stepping stone" to the CCSP. - Passing The Ccna And Ccnp: Cisco Home Lab Faq
There is a real revolution today among CCNA and CCNP candidates. More and more of you are turning your back on "router simulators" and putting your own CCNA and/or CCNP Home Lab together, which is the best way to totally prepare to pass these tough Cisco exams.
I get hundreds of emails every month from CCNA and CCNP candidate who are putting together their first lab or adding to their existing one. I'm always glad to help with suggestions, and I thought I'd list five common questions regarding home labs here. - Passing Your Ccna And Ccnp: Configuring And Troubleshooting Router-on-a-stick
For CCNA and CCNP candidates, it's hard not to laugh the first time you hear the phrase "router on a stick". Let's face it, that's a pretty silly term. But as those who have passed the CCNA and CCNP exams know, this is a vital exam topic that you must know how to configure and troubleshoot.
Basic Cisco theory states that for hosts in different VLANs to communicate, a Layer 3 device must be involved to handle the routing between the VLANs. That device is a router, and there are special considerations that must be taken into account for both the physical router itself and the configuration you'll be writing. - Cisco Ccna / Ccnp Home Lab: Why You Need An Isdn Simulator
ISDN is a vital topic for today's CCNA and CCNP candidates, especially for the ICND and Intro exams - you've got to know ISDN inside and out to pass those exams. Naturally you want to include it in your home lab. What many candidates don't realize is that you can't connect two Cisco routers directly via their Basic Rate Interface (BRI) interfaces you've got to have another device between them called an ISDN simulator.
An ISDN simulator is not one of those software programs pretending to be routers ("router simulators") this is a piece of hardware that acts as the telephone company in your home lab. Older simulators come with preprogrammed phone numbers and SPIDs, where newer ones let you program the phone numbers you want to use. Either way, an ISDN simulator is great for your CCNA/CCNP home lab, because you can practice dial scenarios that actually work. And you get to troubleshoot the ones that don't, which is also important to learn! ) - Passing The Cisco Ccna Exam: An Illustrated Guide To Router Modes
When you're getting started on your CCNA studies, learning the different router modes is key to passing your Intro and ICND exams. But keeping those modes straight can be very difficult. (At least it was for me!) Let's take a look at the various router modes you'll need to know about to pass your CCNA, and use IOS Help to illustrate the different uses of each mode.
The first mode you'll see on a router (if the person before you logged off as they should have) is user exec mode. This is also the default mode a user is placed into when using Telnet to connect to a router. The prompt will look like this: - Passing Cisco Ccna And Ccnp Exams: Ping And Extended Ping
I often tell CCNA and CCNP candidates that you do your best learning when you screw something up. I often get a funny look right after I say that, but the only way to develop your Cisco troubleshooting skills - the skills you'll need to pass your Intro, ICND, and CCNP exams - is by actually fixing configurations. Since your employer will take a dim view of you practicing these skills on his or her network, you better do so on your home lab!
Three essential tools for networking and CCNA/CCNP exam success are ping, extended ping, and traceroute. Today we're going to take a look at the ping that we're used to using for LAN issues, and the extended ping.
We're all familiar with "basic" ping, where you use the ping command followed by the IP address you want to confirm IP connectivity with. When you've got connectivity, you will see five exclamation points, as seen here: - Passing Cisco’s Ccna And Ccnp Exams: Traceroute
In preparation for your CCNA and CCNP exam success, you've got to learn to troubleshoot Cisco routers. And while ping is a great basic IP connectivity tool, it doesn't give you all the information you need to diagnose network connectivity issues.
Let's say you have six routers between CityA and CityB. You send a ping from A to B, and get this return: - Ccna / Ccnp Home Lab Tutorial: The Vlan.dat File
CCNA and CCNP candidates who have their own Cisco home labs often email me about an odd situation that occurs when they erase a switch's configuration. Their startup configuration is gone, as they expect, but the VLAN and VTP information is still there!
Sounds strange, doesn't it? Let's look at an example. On SW1, we run show vlan brief and see in this abbreviated output that there are three additional vlans in use: - Passing Cisco's Ccna And Ccnp Exams: Five Tips For Exam Day Success
As you get ready to pass the CCNA or CCNP exams, you can feel quite a bit of stress as you enter your last week of study. Let's take a look at a few ways to reduce that stress.
1. Do not stay up late cramming. The CCNA and CCNP are not exams you're going to pass by cramming. "Cramming" is a study technique best left behind in junior high school. The CCNA can't be passed by memorization - you've got to know how Cisco technologies work. That leads us to the second point... - Passing The Ccna And Ccnp Exams: Setup Mode
CCNA and CCNP candidates need to know all about Setup Mode, why a router goes into that mode, and as you'll see, how to get out of that mode. Practicing Setup Mode at work is a good way to get fired, though, so you need to practice this on your CCNA / CCNP home lab or rack rental. In this article, we'll take a look at a Cisco 2500 router going into setup mode and a few tips that will help you pass the exams and excel at your job.
First, why does a router go into Setup Mode in the first place? When a Cisco router boots up, the router looks into Non-Volatile RAM (NVRAM) for the startup configuration file. If such a file is not found, and the router has not been programmed to look to a TFTP server for this file, the router enters setup mode. - Cisco Ccna / Ccnp Certification: How And Why To Build An Etherchannel
CCNA and CCNP candidates are well-versed in Spanning-Tree Protocol, and one of the great things about STP is that it works well with little or no additional configuration. There is one situation where STP works against us just a bit while it prevents switching loops, and that is the situation where two switches have multiple physical connections.
You would think that if you have two separate physical connections between two switches, twice as much data could be sent from one switch to the other than if there was only one connection. STP doesn't allow this by default, however in an effort to prevent switching loops from forming, one of the paths will be blocked. - Cisco Ccna / Ccnp Certification: Ospf E2 Vs. E1 Routes
OSPF is a major topic on both the CCNA and CCNP exams, and it's also the topic that requires the most attention to detail. Where dynamic routing protocols such as RIP and IGRP have only one router type, a look at a Cisco routing table shows several different OSPF route types.
R1#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
In this tutorial, we'll take a look at the difference between two of these route types, E1 and E2.
Route redistribution is the process of taking routes learned via one routing protocol and injecting those routes into another routing domain. (Static and connected routes can also be redistributed.) When a router running OSPF takes routes learned by another routing protocol and makes them available to the other OSPF-enabled routers it's communicating with, that router becomes an Autonomous System Border Router (ASBR).
Let's work with an example where R1 is running both OSPF and RIP. R4 is in the same OSPF domain as R1, and we want R4 to learn the routes that R1 is learning via RIP. This means we have to perform route redistribution on the ASBR. The routes that are being redistributed from RIP into OSPF will appear as E2 routes on R4:
R4#show ip route ospf
O E2 5.1.1.1 [110/20] via 172.34.34.3, 00:33:21, Ethernet0
6.0.0.0/32 is subnetted, 1 subnets - What Certification Should You Pursue After The Ccna ?
Once you've got your CCNA, you're ready to move on to the next level, the Professional certifications. For years, Cisco had one Professional certification, the Cisco Certified Network Professional (CCNP) certification. Over time, Cisco has expanded this level of certifications to include the Cisco Certified Security Professional (CCSP) and Cisco Certified Voice Professional (CCVP).
With security and voice being the two most rapidly expanding areas of today's networks, some new CCNAs consider going after the CCSP or CCVP without first adding the CCNP to their resume. - Ccna / Ccnp Home Lab Tutorial: Assembling Your Cisco Home Lab
A CCNA or CCNP candidate who wants to be totally prepared for their exams is going to put together a home lab to practice on. With used Cisco routers and switches more affordable and plentiful then ever before, there's really no excuse to not have one!
With the many different models available, there is some understandable confusion among future CCNAs and CCNPs about which routers to buy and which ones to avoid. You can take almost any set of Cisco routers and put together a home lab; part of the learning process is taking what equipment you have available and putting together your own lab! For those of you preparing to start your home lab or add to your existing one, this article will list the routers I use in my Cisco pods. You certainly don't have to have all this equipment, but this will give you some good ideas on how to get started. - Tips On Buying A Cisco Ccna / Ccnp Home Lab Kit
Buying a CCNA / CCNP home lab is the best way to be totally prepared for your Cisco exams. Most home labs are put together one router or switch at a time, but many CCNA / CCNP candidates prefer to buy kits where you get multiple routers and switches, along with all the cables and other connection devices you'll need.
While this is a good idea, keep a few things in mind when purchasing Cisco home lab kits. - Cisco Ccna / Ccnp Tutorial: Home Lab Assembly Case Study
Part of your CCNA / CCNP education is deciding what network topology to use when you're putting together your home lab. Some of you are starting with one or two routers or switches, while others are starting with more. A customer recently sent me a list of his Cisco routers and switches that he has available for a home lab and asked for my help in coming up with the best way to use them.
There is no "right" or "wrong" answer to this question; again, part of the learning process is configuring and reconfiguring the physical topology of your lab. Let's look at the routers and switches he has available, including the interfaces on each, and come up with one possible CCNA / CCNP home lab setup. - Cisco Ccna / Ccnp Home Labs: Developing Troubleshooting Skills
CCNA / CCNP candidates are going to be drilled by Cisco when it comes to troubleshooting questions. You're going to have to be able to analyze configurations to see what the problem is (and if there is a problem in the first place), determine the meaning of different debug outputs, and show the ability not just to configure a router or switch, but troubleshoot one.
That's just as it should be, because CCNAs and CCNPs will find themselves doing a lot of troubleshooting in their careers. Troubleshooting isn't something that can just be learned from a book; you've got to have some experience working with routers and switches. The only real way to learn how to troubleshoot is to develop that ability while working on live equipment. - Computer Certification: Become A Utility Player
In baseball, a "utility player" is one who plays more than one position. These players are usually backups, but they have a job in the major leagues because of their value to the team; since they can play more than one position, they have that much more value to their employer.
Too often in IT, workers become either LAN or WAN engineers, knowing little if anything about the other side. Many LAN administrators I worked with knew little about routing and switching, while many WAN engineers I knew not only didn't know much about the LAN side of their network, but they didn't want to know anything about the servers! - Cisco Certification: Recertifying Your Ccna And Ccnp
Once you get your CCNA and CCNP, you can't just rest on your accomplishment. You've got to continue to study and add to your skill set - and then prove to Cisco you've been doing just that by recertifying.
Recertification sounds like a pain, but it's actually one of the best things to ever happen to computer certification, and it helps your career as well. One trap many LAN and WAN personnel fall into is that they fail to keep up with changes in technology, and if they happen to be laid off or want to change jobs, they're unable to because they didn't keep their skill set up. - Cisco Ccna Certification: Broadcasts, Unicasts, And Multicasts
When you begin your CCNA studies, you get hit with a lot of different networking terms right away that you might not be familiar with. What makes it a little more confusing is that a lot of these terms sound a lot alike. Here, we're going to discuss the differences between broadcasts, multicasts, and unicasts at both the Data Link (Layer 2) and Network (Layer 3) layers of the OSI model.
A broadcast is simply a unit of information that every other device on the segment will receive. A broadcast is indicated by having every bit of the address set to its highest possible value. Since a hexadecimal bit's highest value is "f", a hexadecimal broadcast is ff-ff-ff-ff-ff-ff (or FF-FF-FF-FF-FF-FF, as the upper case does not affect hex value). The CCNA exam will demand you be very familiar with hex conversions, so if you're not comfortable with these conversions, get comfortable with them before taking the exam! - Cisco Ccnp Certification: Using The Bgp Command “update-source”
When you start preparing for your CCNP exam, particularly the BSCI exam, you're introduced to Border Gateway Protocol (BGP) configurations. BGP is unlike any protocol you learned during your CCNA studies, and even the similarities are a little bit different!
BGP forms neighbor relationships, much like EIGRP and OSPF do. The interesting thing with BGP is that potential neighbors, or "peers", do not need to be directly connected and can use their loopback interfaces to form the peer relationships. - Cisco Ccna / Ccnp Certification: Introduction To Bgp Attributes
BGP is one of the most complex topics you'll study when pursuing your CCNP, if not the most complex. I know from personal experience that when I was earning my CCNP, BGP is the topic that gave me the most trouble at first. One thing I keep reminding today's CCNP candidates about, though, is that no Cisco technology is impossible to understand if you just break it down and understand the basics before you start trying to understand the more complex configurations.
BGP attributes are one such topic. You've got well-known mandatory, well-known discretionary, transitive, and non-transitive. Then you've got each individual BGP attribute to remember, and the order in which BGP considers attributes, and what attributes even are... and a lot more! As with any other Cisco topic, we have to walk before we can run. Let's take a look at what attributes are and what they do in BGP. - Cisco Ccna / Ccnp Home Lab Setup: How To Configure Reverse Telnet
Occasionally, during your CCNA and CCNP studies, you'll run into a term that just doesn't quite make sense to you. (Okay, more than occasionally!) One such term is "reverse telnet". As a Cisco certification candidate, you know that telnet is simply a protocol that allows you to remotely connect to a networking device such as a router or switch. But what is "reverse telnet", and why is it so important to a Cisco CCNA / CCNP home lab setup?
Where a telnet session is started by a remote user who wants to remotely control a router or switch, a reverse telnet session is started when the host device itself imitates the telnet session. - Cisco Ccna Certification: How And Why Switches Trunk
Your CCNA studies are going to include quite a bit of information about switches, and for good reason. if you don't understand basic switching theory, you can't configure and troubleshoot Cisco switches, either on the CCNA exam or in the real world. That goes double for trunking!
Trunking is simply enabling two or more switches to communicate and send frames to each other for transmission to remote hosts. There are two major trunking protocols that we need to know the details of for exam success and real-world success, but before we get to the protocols, let's discuss the cables we need. - Cisco Ccna Certification: The (many) Different Kinds Of Switching
When you're studying for your CCNA exam, whether you're taking the Intro-ICND path or the single-exam path, you're quickly introduced to the fact that switching occurs at Layer 2 of the OSI model. No problem there, but then other terms involving switching are thrown in, and some of them can be more than a little confusing. What is "cell switching"? What is "circuit switching"? Most confusing of all, how can you have "packet switching"? Packets are found at Layer 3, but switching occurs at Layer 2. How can packets be switched?
Relax! As you'll see in this article, the terms aren't that hard to keep straight. Packet switching, for example, describes a protocol that divides a message into packets before they're sent. The packets are then sent individually, and may take different paths to the same destination. Once the packets arrive at the final destination, they are reassembled. - Cisco Ccna Certification: Five Key Combinations You Should Know
When you start studying for your CCNA and CCNP exams, many books will present you with a huge list of keystroke shortcuts for use on Cisco routers. While the 640-801, 811, and 821 exams may ask you about one or two of these, you really have to get hands-on experience with these commands to master them. Even better, there are some key combinations that Cisco routers mention, but then don't tell you what they are! Let's take a look at a few of the more helpful key combinations, and conclude with the "secret" way to stop a ping or traceroute.
The up arrow on your keyboard is great for repeating the last command you typed. Let's say you mis-enter an access-list. Instead of typing it from the beginning, just hit your up arrow to repeat it, then fix the problem. - Cisco Ccnp Certification: The Bgp Weight Attribute
When you're studying for the CCNP certification, especially the BSCI exam, you must gain a solid understanding of BGP. BGP isn't just one of the biggest topics on the BSCI exam, it's one of the largest. BGP has a great many details that must be mastered for BSCI success, and those of you with one eye on the CCIE must learn the fundamentals of BGP now in order to build on those fundamentals at a later time.
Path attributes are a unique feature of BGP. With interior gateway protocols such as OSPF and EIGRP, administrative distance is used as a tiebreaker when two routes to the same destination had different next-hop IP addresses but the same prefix length. BGP uses path attributes to make this choice. - Cisco Certification: The "secret" Key To Getting Your Ccna And Ccnp
Whether you're working on your CCNA or CCNP, Cisco certification exams are the most demanding computer certification exams in the IT field. Cisco exams are not a test of memorization, they're a test of your analytical skills. You'll need to look at configurations and console output and analyze them to identify problems and answer detailed questions. To pass these demanding exams, you've got to truly understand how Cisco routers and switches operate - and the key to doing so is right in front of you.
The debug command. - Cisco Ccna Certification: Error Detection Vs. Error Recovery
Passing the CCNA, Intro, and ICND exam is all about knowing and noticing the details. (Which makes perfect sense, since becoming a master networking administrator or engineer is also about noticing the details!) One such detail knows the difference between error detection and error recovery. While the terms are sometimes used interchangeably, they are not the same thing.
Error detection is just that - error detection only. Two common error detection methods are found at the Data Link layer of the OSI model, the FCS (Frame Check Sequence) and CRC (Cyclical Redundancy Check). A mathematical equation is run against the data in the frame, and the result is sent along with the data. The receiver runs the equation again, but this time. If the result is the same, the frame is considered valid; if the result is different, the frame is considered corrupt and is discarded. - Cisco Ccnp / Bsci Certification: The Local Preference Bgp Attribute
When studying for your BSCI exam for the CCNP, you get your first taste of BGP. One of the major differences between BGP and the other protocols you've studied to date is that BGP uses attributes to describe paths, and to influence the selection of one path over the other.
In this free tutorial, we're going to take a look at the Local Preference attribute and compare it to the Cisco-proprietary BGP attribute "weight". - Cisco Ccna Certification: Cisco Switching Modes Tutorial
To pass the CCNA exam and earn that coveted certification, you've got to know Cisco switches inside and out. Among the many important details you've got to know are the three methods that Cisco switches use to forward frames, and the differences between the three.
The first switching method is Store-and-Forward. The name is the recipe, because that's just what the switch does - it stores the entire frame before beginning to forward it. This method allows for the greatest amount of error checking, since the Frame Check Sequence (FCS) can be run before the frame is forwarded. As always, there is a tradeoff, since this error checking process makes this the slowest of the three frame forwarding methods. - Cisco Ccnp / Bsci Certification: The Bgp Attribute “med”
When you're preparing to pass the BSCI exam and earn your CCNP certification, one of the biggest challenges is learning BGP. BGP is totally different from any protocol you learned to earn your CCNA certification, and one of the differences is that BGP uses path attributes to favor one path over another when multiple paths to or from a destination exist.
Notice I said "to or from". In earlier free BGP tutorials, I discussed the BGP attributes "weight" and "local preference". These attributes are used to favor one path to a destination over another; for example, if BGP AS 100 has two paths to a destination in AS 200, these two attributes can be set in AS 100 to favor one path over another. But what if AS 100 wants to inform the routers in AS 200 as to which path it should use to reach a given destination in AS 100? - Cisco Ccna Certification: The Value Of The Ccna And Ccnp
One question I see often on the 'Net is "Is it worth my time to earn a CCNA / CCNP / CCIE certification?" My personal answer to that is a resounding yes. The power of Cisco certifications has allowed me to create a tremendous career, and they can do the same for you.
There has never been a better time to accelerate your IT career, and earning a technical certification is a great way to do just that. I don't care if you're looking at earning an MCSE, a Cisco certification, Red Hat, or any other vendor - you are always better off having a technical certification than not having one. Technical certifications are an excellent way to market yourself and stand out from the crowd. Earning certifications shows a potential employer (and your current one) that you are willing to go the extra mile. - Cisco Ccnp / Bsci Certification: Introduction To Isis Terminology
When you're studying to pass the BSCI exam and earn your CCNP certification, you're going to be introduced to ISIS. ISIS and OSPF are both link-state protocols, but ISIS works quite differently from OSPF. You must master these details in order to earn your CCNP.
One of the major differences between OSPF and ISIS will be evident to you when you first begin your BSCI exam studies, and that is the terminology. ISIS uses terms that no other protocol you've studied to date uses, and learning these new terms is the first step to BSCI and CCNP exam success. - Cisco Ccnp / Bsci Tutorial: The Bgp Attribute Next_hop
When you're studying for the BSCI exam on the way to earning your CCNP certification, you've got to master the use of BGP attributes. These attributes allow you to manipulate the path or paths that BGP will use to reach a given destination when multiple paths to that destination exist.
In this free BGP tutorial, we're going to take a look at the NEXT_HOP attribute. You may be thinking "hey, how complicated can this attribute be?" It's not very complicated at all, but this being Cisco, there's got to be at least one unusual detail about it, right? - It’s 2006. Do You Know Where Your It Career Is?
Whether you're thinking of starting a career with computers and information technology, or thinking about earning a professional certification such as the CCNA or MCSE to accelerate your career, there is no better time to start than today. Silicon Valley is hiring again, and while we all can't work for Google, IT hiring is at its highest level in years and the opportunities for driven, motivated individuals are unlimited.
I also know that for many of us, the holiday season is a good excuse to put off those studies! "I'll study for the CCNA after Thanksgiving..." "I'll start working on my CCNP after the New Year..." Well, guess what - the new year is here. - Cisco Ccna / Ccnp Home Lab Tutorial: The (many) Cable Types And Their Purposes
One of the most common questions I get from CCNA and CCNP candidates who are setting up their own home labs is "What cables will I need?" The answer is "It depends." As you know from your exam studies, the physical layout of your lab is what determines the cables you'll need. Let's take a look at the most common home lab cable types and when you will need them.
Straight-through cables have quite a few uses in a CCNA / CCNP home lab. You'll need them to connect a switch port to an AUI port on a router (and you'll need a transceiver for that as well). If you have an ISDN simulator, straight-through cables can be used to connect a router's BRI port to the simulator. - Cisco Ccnp / Bsci Tutorial: Comparing Ospf And Isis Hellos
While studying to pass the BSCI exam and preparing to earn your CCNP certification, you'll quickly notice that while OSPF and ISIS are both link-state protocols, there are a lot of differences between the two. One major difference is the way the two protocols handle hello packets.
Hello packets are imperative to keeping OSPF and ISIS adjacencies alive. Since they are both link-state protocols, neither of them will send updates at any specified time. Hello packets are the only method by which routers running OSPF and ISIS can see that a neighboring router is still available. - How To Become A Cisco Ccnp
Congratulations on your decision to earn your CCNP certification! As a CCIE, I can tell you that Cisco certifications are both financially and personally rewarding.
To earn your CCNP, you first have to earn your CCNA certification. Then you're faced with a decision - take the three-exam CCNP path, or the four-exam path? They're both quite demanding, so let's take a look at each path. - Cisco Ccnp Certification Faq
To earn your CCNP, you've got to pass some very rigorous Cisco exams, and you also need to know the rules regarding this important certification. In this article, I'll answer some of the most commonly asked questions regarding the CCNP.
Q: What exams do I need to pass to get my CCNP? - Four Important Commands For Your Ccna / Ccnp Home Lab
More CCNA and CCNP candidates than ever before are putting together their own home practice labs. It's more affordable than it ever has been, and I receive emails daily from new CCNAs and CCNPs who say it's the best thing they could have done to improve their studies.
There are some commands you can configure on your lab routers that won't necessarily be on your CCNA or CCNP exams, but they will make life a lot easier for you. Let's take a look at just a few of these. - Cisco Ccna / Ccnp Home Lab Tutorial: Starting Over
When you're preparing for success on your CCNA or CCNP certification exams, sooner or later you're going to want to start totally from scratch on your Cisco routers and switches. It's easy enough to type "write erase" and "reload", but there are a few details you have to watch if you want your home lab or rack rental devices to act as though they just came out of the box.
The first step is indeed to run the command write erase, and then reload the router. You're going to be prompted with a question before the reload starts, though, and you have to give the right answer .... or your configuration will still be there when you reload! - Cisco Ccna Certification: The Path To Take After Earning The Ccna
Once you earn your CCNA certification, you've got quite a few exciting choices ahead of you! The majority of CCNAs go on to pursue another Cisco certification, and this is a wise decision. The more you know, the more valuable you are in today's IT market.
A question I'm often asked by new CCNAs is "Which certification should I go after next?" Often, these new CCNAs have their eye on the Cisco Certified Security Professional (CCSP) certification. While adding a security certification to your resume is an excellent idea, I strongly recommend that new CCNAs acquire their Cisco Certified Network Professional (CCNP) certification before pursuing their security certifications. The CCNP requires you to pass three or four exams (depending on the path you choose) that will demand a further mastery of some subjects you studies to earn your CCNA as well as several important topics that you haven’t seen yet. - Cisco Ccnp / Bsci Certification: Troubleshooting Route Redistribution, Part I
If there's one CCNP / BSCI topic that looks so easy but can lead to a real headache, it's route redistribution. I'm not even talking about the routing loops and suboptimal routing that can result when route redistribution is done without proper planning - I'm talking about the basic commands themselves. Leaving out one single command option, or forgetting what else needs to be redistributed when redistributing dynamically discovered routes, can leave you with a routing table that looks complete but does not result in full IP connectivity.
In this free CCNP / BSCI tutorial series, we'll take a look at three common errors in route redistribution configurations, and how to fix them. We'll use three routers, R1, R3, and R5. R1 and R5 are in a RIPv2 domain and R1 and R3 are in an OSPF domain. R1 will be performing two-way route redistribution. - Cisco Ccna Certification: Defining Broadcast Domains
When you're studying to pass the CCNA exam and earn your certification, you're introduced to a great many terms that are either totally new to you or seem familiar, but you're not quite sure what they are. The term "broadcast domain" falls into the latter category for many CCNA candidates.
A broadcast domain is simply the group of end hosts that will receive a broadcast sent out by a given host. For example, if there are ten host devices connected to a switch and one of them sends a broadcast, the other nine devices will receive the broadcast. All of those devices are in the same broadcast domain. - Cisco Ccnp / Bsci Certification: Route Redistribution And The Seed Metric
In the first part of this free CCNP / BSCI tutorial, we looked at how leaving one simple word out of our route redistribution configuration - "subnets" - resulted in an incomplete routing table when redistributing routes from RIP to OSPF. (If you missed that part of the tutorial, visit my website's "Free Tutorials" section.) Today, we'll look at redistributing OSPF routes into RIP and identify another common redistribution error.
We are using a three-router network. R5 is running RIP, R1 is serving as a hub between R5 and R3 and is running RIP and OSPF, and R3 is running OSPF. - Cisco Ccnp / Bsci Certification: Bgp Route Reflector Tutorial
When you're studying for your BSCI exam and CCNP certification, you quickly realize that BGP is a whole new world from anything you've previously studies. One topic that sometimes confuses CCNP candidates is when a BGP route reflector needs to be configured.
In the following example, the routers R1, R2, and R3 are all in BGP AS 100. This is not a full mesh, however. There are peer relationships between R1-R2 and R1-R3, but not between R2 and R3. R3 is advertising network 3.3.3.0/24 via BGP, and the route is seen on R1. R1's iBGP neighbor, R2 does not see the route. - Cisco Ccna Certification: Defining And Creating Collision Domains
When you're studying to pass the CCNA exam and earn your certification, you're introduced to a great many terms that are either totally new to you or seem familiar, but you're not quite sure what they are. The term "collision domain" falls into the latter category for many CCNA candidates.
What exactly is "colliding" in the first place, and why do we care? It's the data that is being sent out onto an Ethernet segment that we're concerned with here. Ethernet uses Carrier Sense Multiple Access / Collision Detection (CSMA/CD) to avoid collisions in the first place. CSMA/CD is a set of rules dictating when hosts on an Ethernet segment can and cannot transmit data. Basically, a host that wants to transmit data will "listen" to the ethernet segment to see if another host is currently transmitting. If no one else is transmitting, the host will go forward with its own transmission. - Cisco Ccna Certification Tutorial: Segmenting Your Network
When you're getting started on your CCNA studies on your way to earning this certification, you're swamped with network device types that you're familiar with, but not quite sure how to use. Let's look at these networking devices and their main purposes.
Hubs and repeaters operate at Layer One of the OSI model, and they have one main purpose - regenerating the electrical signal that Layer One technologies carry. This regeneration helps to avoid attenuation, the gradual weakening of a signal. Much like a radio signal, the electric signals that travel at Layer One gradually weaken as they travel across the wire. Hubs and repeaters both generate a "clean" copy of the signal. - Cisco Ccnp / Bsci Tutorial: The Role Of The Ospf Asbr
To pass the BSCI exam and earn your CCNP certification, you've got to master the (many) details of OSPF. You might have thought there were quite a few OSPF details in your CCNA studies, but you'll now build on that foundation on the way to earning your CCNP.
One such detail is the role of the Autonomous System Border Router (ASBR) in OSPF. The name itself raises some eyebrows, since you learned in your CCNA studies that OSPF doesn't use autonomous systems! Just as an OSPF Area Border Router borders multiple OSPF areas, the ASBR borders the entire OSPF domain and another source of routes. This can be another dynamic routing protocol, or directly connected networks that are not being advertised into OSPF by the network command. - Cisco Ccnp / Bsci Tutorial: Route Summarization With Rip And Eigrp
To pass your BSCI exam and earn your CCNP certification, you've got to master route summarization. When you get to the BSCI level, actually breaking the routes down into binary strings and performing summarization is second nature to you. (If it isn't, get some more practice!) What makes CCNP / BSCI route summarization more difficult is just keeping the different protocol summarization commands straight!
RIP and EIGRP both perform route summarization at the interface level with the ip summary-address command. In the following example, R2 is running RIP and was sending four routes to R3, R3's table looked like this before summarization: - Cisco Ccna Certification: Static Routing Tutorial
In studying for your CCNA exam and preparing to earn this valuable certification, you may be tempted to spend little time studying static routing and head right for the more exciting dynamic routing protocols like RIP, EIGRP, and OSPF. This is an understandable mistake, but still a mistake. Static routing is not complicated, but it's an important topic on the CCNA exam and a valuable skill for real-world networking.
To create static routes on a Cisco router, you use the ip route command followed by the destination network, network mask, and either the next-hop IP address or the local exit interface. It's vital to keep that last part in mind - you're either configuring the IP address of the downstream router, or the interface on the local router that will serve as the exit interface. - Cisco Ccnp Certification / Bsci Exam Tutorial: Floating Static Routes
Passing the BSCI exam and earning your CCNP certification demands that you add greatly to the networking skills foundation you created when you studied for your CCNA certification. You learned quite a bit about static routing and default static routing when you passed the CCNA test, and it does seem like that should be all you need to know about static routing, right?
One thing you'll learn as you continue to earn Cisco certifications is that there's always something else to learn! You may have heard the term "floating static route", which does suggest some interesting mental pictures. "Floating"? Floating on what? - Cisco Ccna Certification Exam Tutorial: Ospf Hub-and-spoke
CCNA certification demands that you master the basics of OSPF, and for many studying for the CCNA exam, their first exposure to OSPF is a hub-and-spoke configuration. That's a tough way to get started, because a hub-and-spoke configuration built over an NBMA technology such as Frame Relay requires quite a bit of attention to detail. Let's take a quick look at several common OSPF configuration errors and how to avoid them on your CCNA test.
Make sure the hub is the designated router and that there are no backup designated routers. This is done by setting the OSPF interface priority to zero on the spoke routers. This not only ensures that the hub wins the DR election with its default OSPF interface priority of 1, but it prevents the spokes from ever having a chance to become the DR or BDR. - Cisco Ccna / Ccnp Certification Exam: Attending A Video Boot Camp
When you're studying for the CCNA and CCNP exams, you've got a lot of different choices when it comes to training. One popular choice is choosing one of the many "boot camps" and five-day in-person courses that are out there. I've taught quite a few of these, and while many of them are good, they do have drawbacks.
Of course, one is cost. Many employers are putting the brakes on paying for CCNA and CCNP boot camps, and most candidates can't afford to pay thousands of dollars for such a class. Then you've got travel costs, meals, and having to possibly burn your own vacation time to take the class. Add in time away from your family and boot camps become impractical for many CCNA / CCNP candidates. - Cisco Ccna / Ccnp Certification Exam: Creating A Study Plan
Whether you're just starting to think about passing the CCNA or CCNP exams, or you've been on the certification track for a while, you've got to have a plan for success. If you wanted to drive your car from Florida to California, you'd create a plan to get there. You'd get a map and decide how far you wanted to drive per day, and maybe even make some hotel reservations in advance. You certainly wouldn't get in your car, just drive it randomly down the nearest highway, and hope you ended up in California, would you?
Certainly not. Earning your CCNA certification is the same way. It's not enough to just study a few minutes "when you feel like it", or tell yourself that you'll start studying for the exams "when I get such-and-such done". The perfect time to start on the road to Cisco certification is not tomorrow, and it's not next week. It's today. - Cisco Ccnp Certification / Bsci Exam Tutorial: Route Summarization Basics
As you earn your CCNA and CCNP certification, you're going to have to get comfortable with manually summarizing routes. This isn't just another reason to learn binary math (although it's a good one!), but summarizing routes is a true real-world skill that can help your network operate more efficiently. So the question isn't just how to summarize routes, it's why.
When you summarize routes in RIP, IGRP, EIGRP, or OSPF, you're replacing a series of routes with a summary route and mask. With RIP, IGRP, and EIGRP, this actually lessens the size of the routing update packet itself - multiple routes are replaced with the summary route. For instance, the routes 8.0.0.0/8, 9.0.0.0/8, 10.0.0.0/8, and 11.0.0.0/8 can be summarized as 8.0.0.0 252.0.0.0. Only the summary address will be found in the update packet, making it concise yet complete. - How To Become A Cisco Vpn Specialist
There's quite an emphasis on security in today's networks, and that's reflected in Cisco's certification tracks. Cisco offers a CCIE Security track and the Cisco Certified Security Professional (CCSP) intermediate-level certification, but there is no real equivalent to the CCNA on the security side. Instead, Cisco offers several different Security Associate certifications.
The good news is that you’ve got a lot of security specializations from which to choose; the bad news is that you’ve got a lot of choices! In choosing a specialization, take some time to choose a certification that will be of practical use to you in your current position or in your “dream job”. - Cisco Ccna Certification Exam Tutorial: The Osi Model’s Physical Layer
To pass your CCNA exam and earn this coveted certification, you've got to master the seven layers of the OSI model and what each layer does. For those of you taking the two-exam path, you can expect quite a few OSI model questions on the Intro exam. In this seven-part series, we'll spend some time taking a look at each of the OSI model layers, starting with the Physical layer.
Often, CCNA candidates ask if the OSI model has any practical uses for network administrators. I used to wonder the same thing, and I can now tell you that the answer is definitely yes! - Cisco Ccna / Ccnp Exam Tutorial: Five Debugs You Must Know
To pass the BSCI exam and move one step closer to CCNP certification success, you've got to know how and when to use debug commands to troubleshoot and verify network operations. While you should never practice debug commands on a production network, it's important to get some hands-on experience with them and not rely on "router simulators" and books to learn about them.
When it comes to RIP, "debug ip rip" is the primary debug to use. This debug will show you the contents of the routing update packets, and is vital in diagnosing RIP version mismatches and routing update authentication issues. - Cisco Ccna Certification Exam: Five Frame Relay Details You Must Know
When you're studying for your CCNA exam on the way to earning this coveted Cisco certification, the details can seem overwhelming! In this article, I'll point out five Frame Relay details that you must keep in mind when you're on your way to the CCNA exam!
Inverse ARP starts working as soon as you open the serial interface. This protocol performs dynamic Frame Relay mapping, but you don't have to enable it - it's already enabled as soon as you enter the command "encapsulation frame-relay". - Cisco Ccnp / Bsci Certification Exam: Five Ospf Details You Must Know
Preparing for your BSCI exam on your way to the Cisco CCNP certification, you can quickly get overwhelmed by the details! Here are five commonly overlooked points you should keep in mind when it comes to your OSPF studies.
The virtual link command includes the area number of the transit area, and if authentication is being used on Area 0, the virtual link command must include the authentication statement. Since the virtual link is a logical extension of Area 0, it stands to reason that it has to be configured with the authentication type and password configured on Area 0. - Microsoft Certification: Farewell To The Mcse
Microsoft is in the middle of a major push to overhaul its certification program. Last year, they announced the new Microsoft Certified Architect (MCA) certification, which is not a written exam but rather a practical exam that will be graded by a board of examiners. Just applying for the certification will require 10 years' experience in IT as well as three years of practical experience as a network architect.
For those of us not quite ready for that, Microsoft has announced that it's also going to revise other certifications. The MCSE that we've all come to know and love is going to be a thing of the past. In its place will be a series of specialization exams and IP Professional certification tracks. - Cisco Ccna Exam Tutorial: Route Summarization
Preparing to pass the CCNA exam and earn this important Cisco certification? Route summarization is just one of the many skills you'll have to master in order to earn your CCNA. Whether it's RIP version 2, OSPF, or EIGRP, the CCNA exam will demand that you can flawlessly configure route summarization.
Route summarization isn't just important for the CCNA exam. It's a valuable skill to have in the real world as well. Correctly summarizing routes can lead to smaller routing tables that are still able to route packets accurately - what I like to call "concise and complete" routing tables. - Cisco Ccnp / Bsci Exam Tutorial: Route Summarization
Preparing to pass the BSCI exam and earn your Cisco CCNP? Route summarization is just one of the many skills you'll have to master in order to earn your CCNP. Whether it's RIP version 2, OSPF, or EIGRP, the BSCI exam will demand that you can flawlessly configure route summarization.
Route summarization isn't just important for the BSCI exam. It's a valuable skill to have in the real world as well. Correctly summarizing routes can lead to smaller routing tables that are still able to route packets accurately - what I like to call "concise and complete" routing tables. - Microsoft Certification: The New Mcts Tracks And Exams
Microsoft is revamping its certification tracks, and will eventually retire the familiar MCSE certificatons. The new certification setup is much like Cisco's, where there are specialist certifications to go along with the more general CCNA, then mid-level certifications such as the CCNP, and then a more-advanced practical exam modeled somewhat after the coveted CCIE certification.
Microsoft's new specialist exams are the Microsoft Certified Technology Specialist (MCTS) exams. As of March 2006, there were five separate MCTS Tracks. Three of them deal with .NET Framework 2.0; these are the Web Application, Windows Applications, and Distributed Applications certifications. Each of these separate certifications requires the candidate to pass two exams. There is also a one-exam SQL Server 2005 certification, as well as a BizTalk Server 2006 single-exam certification. - Cisco Ccna Certification Exam Tutorial: Prefix Notation
When you're preparing to pass the CCNA exam and earn this coveted Cisco certification, you've got to be totally prepared for the many kinds of binary and subnetting questions Cisco may throw at you. You also have to be familiar with the different manners in which a subnet mask can be expressed, as in the following:
255.255.255.0 - Cisco Ccnp / Bsci Exam Tutorial: Ospf Router Types
When you're preparing to pass the BSCI exam on the way to the coveted Cisco CCNP certification, you can be quickly overwhelmed by the sheer amount of BGP and OSPF knowledge you must demonstrate a mastery of. One set of details that some BSCI and CCNP candidates underestimate are the differences between the OSPF router types.
An OSPF Internal router has one rule - it must have all its interfaces in a single area. It does not mean that area has to be Area 0. - More Questions To Ask A Computer Training School Before Paying
The decision to attend a computer training school is one of the most important you'll ever make, and even more important is which one to attend. Asking the right questions can give you an idea of whether a given IT school is a good investment. An earlier article I wrote on this subject was so popular that I thought I'd offer some more advice on the questions to ask before you write that check or take out that loan.
If the school offers a placement service, ask to talk to the people working in that department and ask them how they go about placing graduates. Most schools offer a list of companies that they've placed students with. Get this list and start calling some of these companies. Ask to speak to their HR department, and ask them for their opinion of the school. Even if they don't say a lot, their tone of voice can speak volumes.
|
|
|
